Received Calls - Panasonic KX-TG2740S Operating Instructions Manual

Displays
Handset
#" " and "
L1
Off (invisible)
On
Flashing
Flashing quickly A call is being received.
$"SP" shows when you are using the handset speakerphone during an
intercom call or a conference call, while listening to messages or while
in the 2-Way Radio mode. When you monitor a room from the speaker,
"SP" will also display.
%" " (directory icon) displays when storing, viewing, sending or
receiving the directory items (p. 51).
&"PRIVACY" indicates the Call Privacy mode is on (p. 71). The base unit
and other handsets cannot join your conversation.
'The battery icon indicates the battery strength (p. 14).
(The extension number of the handset is displayed if the handset has
been registered to the base unit (p. 31, 105).
)The display shows the dialed number, call status, programming options
and directory items etc. If you subscribe to a Caller ID service, caller
information will be displayed. "Received calls" will be displayed
when new calls have been received.
*The prompts on the bottom line will show corresponding functions of the
three soft keys which are located directly below the display (p. 9).
Ex. The soft key below "
+" " (extension icon) is displayed with the extension numbers during an
intercom (p. 64) or a conference call (p. 69), or while using the Room
Monitor feature (p. 73) or the 2-Way Radio mode (p. 75).
Backlit LCD display
Both the handset and base unit have a backlit LCD display.
The lighted handset display will stay on for a few seconds after pressing a
button to start or complete operations or after the handset is lifted off the
cradle. The base unit display will remain lit during use.
10
# $ % & ' (
L1 L2 SP

Received calls

+
LINE1 LINE2
" (Line status icons) function as follows.
L2
The line is free.
The line is being used.
A call is on hold within this system (handset or base unit)
or the Answering System is responding to a call (p. 84).
PLAY
[ ]
PRIVACY 1
G
01
P L A Y
" will function as
)
*
key.
PLAY