Panasonic KX-TG2740S Operating Instructions Manual page 108

If the Following Appear...
Display message
Not found
2Way radio mode
(handset only)
Invalid.
Please register
to the base unit
(handset only)
Greeting record
L1&L2
Recording error
(base unit only)
Memo record
Mailbox1
Recording error
(base unit only)
All mailbox full
(base unit only)
Error!!
8 handsets have
already been
registered.
(handset only)
108
Cause & Remedy
When you tried to call another handset in the
2-Way Radio mode;
– the handset is too far from your handset. Walk
closer to the handset.
– 2-Way Radio mode on the handset is off (p. 74).
– The called handset is talking with another
handset in the 2-Way Radio mode.
The handset you tried to make a call has not
been registered to the base unit. Register it
(p. 31, 105).
"Your greeting was not recorded. Record your
greeting again." is announced. Your greeting was
not recorded correctly. Record it again (p. 28).
"Your message was not recorded. Record your
message again." is announced. The message was
not recorded correctly. Record it again (p. 89).
The remaining recording time or the number of
messages which can still be recorded is 0.
Erase unnecessary messages (p. 88), and record
your greeting or memo message again (p. 28, 89).
• 8 handsets have already been registered to the
base unit. To cancel another handset
registration, see page 104.
• This base unit has the memory of the handset
currently registered to another base unit. Erase
the handset memory from the base unit.
For KX-TG2740S base unit:
(1) Press
(FUNCTION)
(3) Enter "335#" and (4) Enter that handset
number (1 to 8).
, (2) Press
(MUTE)
,