Table of Contents
Advertisement
Preparing for installation
Unpacking the 1002rp server
Introduction
Follow this procedure to unpack the server and peripherals.
Warning:
Risk of personal injury
The 1002rp CallPilot server weighs approximately 34 kg (75 lb) as shipped from
manufacturing. To prevent personal injury, have someone help you to unpack and position
the server.
To unpack the equipment
1.
2. Remove the server from the carton; set it on the floor.
3. Carefully open the cartons containing the monitor, keyboard, mouse, modem, and
4. Put all manuals, CD-ROMs, operating system disks, and any disks for peripherals
5. Save all packing materials and cartons in case you must return any equipment to
What is next?
Remove the server cover so that you can inspect the interior of the server. See
front bezel and server cover
®
28
Avaya CallPilot
1002rp Server Hardware Installation
Important:
As you unpack each item, check it off against the packing list, as well as against
the following checklists provided in the Installation and Configuration Task List
(NN44200-306):
• "CallPilot software media and documentation checklist"
• "CallPilot server hardware checklist"
Carefully open the cardboard carton containing the server.
ELAN hub (if supplied), and set the peripherals aside.
in a safe place.
the carrier.
on page 29.
Removing the
December 2010
Advertisement
Table of Contents
