Chapter 3: Preparing for installation
In this chapter
Installation overview
Unpacking the 1002rp server
Removing the front bezel and server cover
Inspecting the server interior
Installation overview
Introduction
This section provides an overview of the steps required to install the 1002rp server and
peripheral devices.
Installation checklist
The following checklist identifies the tasks that must be performed when installing the Avaya
®
CallPilot
server. For detailed instructions, see
are finished with the installation, continue with the Installation and Configuration Task List
(NN44200-306).
Step
1
Ensure that you have reviewed the "Installing the Avaya CallPilot server"
section in the Installation and Configuration Task List (NN44200-306),
and completed stage 1 of the "Installation checklist."
®
Avaya CallPilot
1002rp Server Hardware Installation
on page 25
on page 28
on page 31
Description
on page 29
Installing the server
on page 43 When you
Check
December 2010
25