Table of Contents
Advertisement
What is next?
Continue with
Inspecting the server interior
Introduction
You should perform a visual inspection for loose components, foreign matter, or shipping
damage inside the server.
Caution:
Risk of equipment damage
When working with interior components, use an ESD wrist strap to protect static-sensitive
components.
To inspect the server interior
1. Carefully check all the cards to ensure they are fully seated on the baseboard.
2. Check for any loose wires or foreign objects, such as loose screws, inside the
3. Review the slot locations (see
4. Do one of the following:
®
Avaya CallPilot
1002rp Server Hardware Installation
Inspecting the server interior
chassis.
IF
you observe any damage
components have become loose
you are satisfied that the 1002rp server
has arrived at your site undamaged
on page 31.
Slot assignments
on page 15).
contact your Avaya technical support
representative.
secure them.
Refer to the procedures in the
Installation and Configuration Task List
(NN44200-306).
replacethe server cover and proceed
with the hardware installation.
See
Installation checklist
What is next?
THEN
on page 25.
December 2010
31
Advertisement
Table of Contents
