Table of Contents
Advertisement
1002rp server description
Switch connectivity
For more details about how the 1002rp server and switch connection is established, refer to
the Installation and Configuration Task List (NN44200-306).
CallPilot ELAN subnet and Avaya server subnet setup
The 1002rp server provides 10/100Base-T Ethernet connectivity through NICs installed in the
server. See
the NIC varies based on switch connectivity, as described below:
Meridian 1 or Communication Server 1000 systems
• One NIC provides connectivity to the ELAN subnet.
For information about the purpose and requirements of the ELAN, see the Planning and
Engineering Guide (NN44200-200).
• A second NIC is optional.
This optional NIC is required only for Meridian 1 or Communication Server 1000 systems
that require a connection to the Avaya server subnet (in addition to the ELAN subnet
connection). The Avaya server subnet provides data connectivity between desktop and
Web messaging clients, Web-enabled administrative PCs, and the CallPilot server.
Network requirements
Appropriate networking equipment must be available for both the Avaya server subnet and
ELAN subnet.
The Avaya server subnet and ELAN subnet must be properly configured for correct CallPilot
operation. To ensure correct configuration, Avaya recommends that you consult a network
specialist.
®
22
Avaya CallPilot
1002rp Server Hardware Installation
Slot assignments
on page 15 for details on the location of NICs. The function of
December 2010
Advertisement
Table of Contents
