Table of Contents
Advertisement
PDU terminal blocks and wiring diagram
A PDU consists of eight terminal blocks within a metal enclosure. Before installing the PDU,
connect the terminal blocks so that each output connector receives power from a separate -48
V dc branch circuit, as shown in the following diagram. Use AWG 10 wires for these
connections.
Figure 1: Single PDU wiring diagram
DC power input
DC power input into the distribution unit connects BAT-1 to BAT-4 and BR-1 to BR-4. Refer to
the preceding diagrams for the location of these terminals. Connect the input wires before
installing the PDU on the rack.
®
Avaya CallPilot
1002rp Server Hardware Installation
PDU terminal blocks and wiring diagram
December 2010
41
Advertisement
Table of Contents
