Driver Api (Ap); Printer Driver Errors (Dr) - DataCard CP60 Service Manual

Driver API (AP)

Error
Code
AP 00800 Data includes too many characters
for the selected track format
AP 00801
(tracks 1,2,&3). Check the data
AP 00802
entered or the format selected.
AP 00804 Data includes a character not
allowed for the selected track format
AP 00805
(tracks 1,2,&3). Check the data
AP 00806
entered or the format selected.
AP 00808 The application used a Datacard
printer function with a printer other
than the Datacard printer.
AP 00809 Internal Datacard printer API error.
AP 00810 The application used a Datacard
printer function out of the proper
sequence.
AP 00811 The application sent a value that is
not consistent with current settings.
AP 00812 The application sent a value that is
not supported by the Datacard
printer API.
AP 00813 A printer error occurred while picking
a card.
AP 00814 A timeout error occurred while
picking a card.
AP 00815 Custom magnetic stripe API
through messages
AP 00825

Printer Driver Errors (DR)

Error
Code
DR 00901 The printer is not responding. Check
the printer and USB cable
connections.
DR 00902 The printer is paused. Click OK to
continue printing.
4-14
Message text
Message text
Comments
Verify the data is correct for the selected track,
and resubmit the card for printing.
Verify the data is correct for the selected track,
and resubmit the card for printing.
Select the CP60 or CP60 Plus printer.
Contact the print application developer.
Contact the print application developer.
Contact the print application developer.
Contact the print application developer.
Inspect the card pick system.
Check the communication cables.
Verify that another USB device is not interfering
with communication.
Comments
• Make sure the printer status light is showing
steady green.
• Check the cables.
• Make sure the computer's USB port is
functioning.
• Check for a broken ribbon.
• Check the ready button; it may be defective.
Troubleshooting