Network Installation Troubleshooting
Problem
The network cable is
loose.
The Status page of
Printer Properties shows
the printer is not
available, but the printer
displays Ready on the
LCD panel.
The printer is not
configured with the
correct network address
Card Printer Driver Problems
The Card Printer Driver and printer can have the following communication problems:
The Card Printer Driver does not detect the network-connected printer
The Card Printer Driver does not detect the USB-connected printer
Driver status or Windows print queue does not provide expected data
Printer Messages do not display on the PC
62
Solution
Reconnect the data cable to the network port and the printer.
Restart the printer.
Follow your network troubleshooting procedures to isolate
and test each component of the computer-to-printer
communication link.
Suggestions:
Verify the computer-to-network connection by accessing a
network resource, such as a network drive.
The network administrator can test communication
between a server and the printer.
Make sure that the user is logged on to the network.
Make sure that the server name or IP address is entered in the
Port Settings or Configure Port dialog box on the computer.
For more information about retrieving the printer's IP
address, refer to
"Retrieve the Printer's Network IP Address"
on
page
23.
Make sure that Ready displays on the printer's LCD panel.
on
page
on
on
page
on
page
65.
page
63.
63.
64.
Troubleshooting