Pick Motor - DataCard CP60 Service Manual

Pick Motor

Removal Procedure
1.
Unplug the printer.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Unplug the wires from the motor.
5.
To access the motor mounting screws, it is necessary to remove the
Hopper
A.
B.
6-24
Main Enclosure
(p. 6-9).
Unsnap the rear transport feet from the base.
Slide the transport chassis back, and simultaneously pull forward on the
card hopper. Remove the card hopper.
(p. 6-8).
Card
Removal and Replacement