Ribbon Index Sensor - DataCard CP60 Service Manual

Ribbon Index Sensor

Removal Procedure
1.
Unplug the printer.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Optional: For easier access, you may choose to remove the
(p. 6-42).
5.
Unplug the sensor from the main control board.
6.
Pull the sensor off the mounting post on the ribbon guide. Pry underneath
with a screwdriver if necessary.
Replacement Notes
• Route the cable through the ribbon guide as shown below.
• Refer to the
replacement details.
• Use the sensor display in Diagnostics to verify the sensor changes state as the
ribbon is advanced.
6-20
Main Enclosure (p. 6-8).
Front Wire Routing and Functional Block Diagram
Removal and Replacement
Ribbon Guide
for