Smart Card Contact - DataCard CP60 Service Manual

Smart Card Contact

Removal Procedure
1.
Unplug the printer.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
5.
Disconnect the interface cable from the smart card interface board. Refer to
the
6.
Remove the
7.
Remove the
8.
Remove the smart card contact carrier:
A.
B.
6-84
Main Enclosure
Transport Assembly
Functional Block Diagram
Ribbon Motor
Solenoid Link
Insert a screwdriver between the carrier and the left mounting tab.
Twist the blade to pry the carrier out of the mounting tab.
(p. 6-8).
from the base (p. 6-29).
(p. 6-6) for location and details.
(p. 6-27).
from the rocker (p. 6-82).
Removal and Replacement