Ribbon Guide - DataCard CP60 Service Manual

Ribbon Guide

Removal Procedure
1.
Unplug the printer and remove the ribbon cartridge and cleaning roller.
2.
Lift the ribbon guide out of the receivers in the transport chassis sidewalls:
A.
B.
C.
3.
If necessary, remove the index sensor from the ribbon guide by lifting it off
the mounting post.
6-42
Simultaneously grasp the left and right sides of the ribbon guide with
both hands.
Flex the transport chassis sidewalls outward with the sides of your fists.
This releases the small locking nibs on the ends of the ribbon guide (see
inset photo below).
Slowly lift the ribbon guide straight up.
Removal and Replacement