Cleaning Drive Roller - DataCard CP60 Service Manual

Cleaning Drive Roller

Removal Procedure
1.
Unplug the printer.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
5.
Remove the cleaning rocker assembly.
6.
Remove the pulley from the shaft by squeezing the end of the shaft, and
slipping the pulley off.
6-46
Main Enclosure
Transport Timing Belt
The pulley's flange is permanently adhered to the pulley. Do not try to
remove the flange.
and card hopper (p. 6-8).
(p. 6-36).
Removal and Replacement