Rear Panel Connections - Planet GRT-101 User Manual

The following table describes the connectors' functions:
Connectors
DC-IN Power adaptor inlet: Input voltage 12VDC
LAN Ethernet interface for LAN port (RJ-45)
CONSOLE RS- 232C (DB9) for system configuration and maintenance
LINE SHDSL interface for WAN port (RJ-45)
RST Reset button for factory default

2.3 Rear Panel Connections

The figure shows the rear panel connections of GRT series.
The STU-R is a standalone and is able to place on desktop. All the external wiring is located at
the rear panel. The LAN port is a 10 Base-T / 100Base-TX auto-sensing and half/full duplex
Ethernet interface and complied with IEEE 802.3 / 802.3u respectively. The console (RS-232C)
interface for configuration is menu-driven operation and can also be configured through
Ethernet interface by Telnet or Web-based operation.
Power
r
Adapte
Figure 2-6 Direct Connection with PC or NB
Table 2-3 Connector Functions
Description
NB
PC
RJ-45
DB-9
cable
Cable
- - 13
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual
Wall Jack