Planet GRT-101 User Manual page 124

SHDSL.bis:
Mode
□STU-C
□2-Wire
Link
□Auto_Fall_Back □Standby
Line rate (Nx64)
Annex Type
□A
SNR Margin
TCPAM
□Auto □TCPAM-16 □TCPAM-32
Probe
□Disable □Enable
TC Layer
□ATM
10.16.2.1 Mode
There are two types of SHDSL.bis mode, STU-C and STU-R. STU-C means the terminal of
central office and STU-R means customer premise equipment.
10.16.2.2 Link
This link item is only for 4-wire model.
2-wire mode
For 4-wire model, it can use only the first one pair for the single pair DSL wire application.
M – Pair Mode
In this mode, each wire pair of SHDSL.bis router must be configured with the same line rate. If
one pair fails then the entire line must be restarted. It also has the Conexant M-pair standard
used with connection to other router with Conexant chip set solution.
Auto Fall Back Mode
Two DSL pairs are working simultaneously. When one pair of both is disconnected, the other
pair will keep working.
Standby Mode
Only one of two pairs is working; the other pair is standby. If the working pair fails, the standby
pair will start up to continue.
Multi–Link Mode
For 4-wire model, each pair will connect to two different remote devices, which may or may not
be in the same location.
10.16.2.3 N*64
□STU-R
□M-Pair □M-Pair(Conexant)
□B □AF □BG
□EFM
124 - -
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual
□Multi-link