Planet GRT-101 User Manual page 139

Set the active interface number via interface command.
You can configure the global port number by using port command.
The local server, host, IP address and port number are configured via server command.
The authorized access protocol is set up via protocol command.
Name command can be used to configure the service name of the host server.
Begin and end command is used to set up the local server schedule to access.
Virtual Server:
Virtual Server entry number(1~10)
Interface(1~8)
ICP/UDP Port Number(1~65534)
Host IP Address
Host Port Number
Protocol
Service Name
Beginning Time
Ending Time
You can view the fixed NAT mapping entry via list command.
10.16.8.3 DMZ
DMZ (demilitarized zone) is a computer host or small network inserted as a "neutral zone"
between a company private network and the outside public network. It prevents outside users
from getting direct access to a server that has company private data.
To set up demilitarized zone, move the cursor ">>" to dmz and press enter.
>> active
address
You can enable the demilitarized zone via active command.
After enabling the DMZ, shift the cursor to address and press enter.
----------------------------------------------------------------------
Command: setup ip_share dmz address <ip> <1~8>
Message: Please input the following information.
Virtual IP address: 192.168.0.251
Active interface number (Enter for default) <1>: 1
----------------------------------------------------------------------
DMZ Host:
DMZ Host Function □Disable
IP Address Active interface number
□TCP
Tigger DMZ host function
Configure virtual IP address and interface
□Enable
1
2
GRT-101/401/402 User's Manual
□UDP
139 - -
G.SHDSL Bridge/Router