Planet GRT-101 User Manual page 130

10.16.5.1 802.11Q VLAN
To modify the VLAN rule, move the cursor " >> " to modify and press enter.
----------------------------------------------------------------------
Command: setup vlan modify <1~8> <1~4094> <string>
Message: Please input the following information.
Rule entry index <1~8>: 1
VLAN ID (ENTER for default) <1>: 10
VLAN port status (ENTER for default)<111111111>:111111111
----------------------------------------------------------------------
For each VLAN, VID(VLAN ID) and PVID is a unique number among 1~4094.
1
No. VID LAN WAN1
1
2
3
4
5
6
7
8
PVID
□Access □Access
Link Type
□Trunk □Trunk
To assign PVID (Port VID), move the cursor ">>" to pvid and press enter. The port index 1
represents LAN and ports index 2 to 9 represents WAN1 to WAN8 respectively. VID value is
the group at which you want to assign the PVID of the port.
----------------------------------------------------------------------
Command: setup vlan pvid <1~9> <1~4094>
Message: Please input the following information.
Port index <1~9>: 1
VID Value (Enter for default) <10>: 10
----------------------------------------------------------------------
VLAN port status is a 9-digit binary number whose bit-1 location indicates the VLAN port
membership in which 1MSB and 8MSBs represents one LAN port and eight WAN ports,
respectively. For example, the setting "vlan modify 1 20 111000000" means that the VID 20
member ports includes LAN, WAN1 and WAN. The member ports are tagged members. Use
PVID command to change the member port to untagged members
To modify the link type of the port, move the cursor to link_mode and press enter. There are
two types of link: access and trunk. Trunk link will send the tagged packet from the port and
Access link will send un-tagged packet from the port. The port index 1 represents LAN and
ports index 2 to 9 represents WAN1 to WAN8 respectively. According to the operation mode of
the device, link type of WAN port is automatically configured. If the product operates in bridge
mode, the WAN link type will be trunk, and in routing mode, access.
2 3 4
WAN2 WAN3
□Access □Access
□Trunk □Trunk
130 - -
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual
5 6
WAN4 WAN5 WAN6
□Access □Access □Access
□Trunk □Trunk □Trunk
7 8 9
WAN7 WAN8
□Access □Access
□Trunk □Trunk