Lan - Planet GRT-101 User Manual

G.shdsl bridge/router
Hide thumbs Also See for GRT-101:
Table of Contents

Advertisement

-----------------------------------------------------------------------------
[ WAN1 ~ WAN8 ]
The product supports 8 PVCs and you can configure the RIP parameters of each WAN via
wan command. Move the cursor ">>" to wan and press enter.
----------------------------------------------------------------------
Command: setup route rip wan <1~8> <more...>
Message: Please input the following information.
Active interface number <1~8>: 1
----------------------------------------------------------------------
The screen will prompt as follows:
>> attrib
version
authe
Attrib command can configure RIP mode, authentication type and Poison reverse mode.
Version command can configure RIP protocol version.
Authe command can configure authentication code.
Interface RIP Parameter:
Interface
RIP Mode
Authentication type
Poison reverse mode □Disable
RIP protocol version □Ver.1
Authentication code
You can review the list of RIP parameters via list command.

10.16.7 LAN

LAN interface parameters can be configured LAN IP address, subnet mask and NAT network
type.
-------------------------------------------------------------------------------
Command: setup lan <1~1> <more...>
Message: Please input the following information.
Interface number <1~1>:1
-----------------------------------------------------------------------------
There is only one LAN port, so type 1 and press ENTER.
-----------------------------------------------------------------------------
>> ip_type
address
attrib
Ethernet
----------------------------------------------------------------------------
Ip_type can set up this IP is Fixed or Dynamic.
Address can set up IP address and subnet mask.
Attrib can set up NAT network type: Global or Virtual.
Ethernet item can set up the PHY parameters on this LAN port: Auto, 100M-Full, 100M-Half,
10M-Full and 10M-Half.
Operation, authentication and Poison reverse mode
RIP protocol version
Authentication code
(LAN, WAN1~8)
□Disable
□Enable
□None
□Password □MD5
□Enable
□Ver.2
IP type
LAN IP address and subnet mask
NAT network type
Media type
GRT-101/401/402 User's Manual
□Silent
134
- -
G.SHDSL Bridge/Router

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grt-401Grt-402

Table of Contents