Host Name; Default - Planet GRT-101 User Manual

DHCP Relay:
DHCP Relay □Disable
IP Address
You can view the full DHCP configuration via list command.
10.16.11.4 DNS Proxy
The Domain Name Service (DNS) is a system designed to allow the identification of Internet servers to
be based on names rather than IP addresses. Because Internet communication is based on IP addresses,
all names must be translated into an IP address. This is the purpose of a Domain Name Server.
Enter the IP address of DNS proxy use DNS proxy command. Move cursor " >> " to dns_proxy and
press enter.
----------------------------------------------------------------------
Command: setup dns_proxy <IP> [IP] [IP]
Message: Please input the following information.
DNS server 1 (ENTER for default) <168.95.1.1>: 10.0.10.1
DNS server 2: 10.10.10.1
DNS server 3:
----------------------------------------------------------------------
You can setup three DNS servers in the router. The number 2 and 3 DNS servers are option.
DNS Server IP:
DNS Server 1 IP
DNS Server 2 IP
DNS Server 3 IP

10.16.12 Host name

A Host Name is the unique name by which a network-attached. The hostname is used to
identify a particular host in various forms of electronic communication.
Enter local host name via hostname command. Move cursor " >> " to hostname and press
enter.
----------------------------------------------------------------------
Command: setup hostname <name>
Message: Please input the following information.
Local hostname (ENTER for default) <SOHO>: test
----------------------------------------------------------------------
The host name can't use more than 15 characters and don't use space character.
Some of the ISP requires the Host Name as identification. You may check with ISP to see if
your Internet service has been configured with a host name. In most cases, this field can be
ignored.
Host Name:
Host Name

10.16.13 Default

If you want to restore factory default, first move the cursor " >> " to default and then press
enter.
----------------------------------------------------------------------
Command: setup default <name>
□Enable
147 - -
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual