Move cursor to " >> " to write and press enter.
----------------------------------------------------------------------
Command: write <CR>
Message: Please input the following information.
Are you sure? (y/n): y
----------------------------------------------------------------------
Press "y" to confirm the write operation.
10.11 Reboot
To reboot the router, please use "reboot" command. Move cursor to " >> " to reboot and press
enter.
----------------------------------------------------------------------
Command: reboot <CR>
Message: Please input the following information.
Do you want to reboot? (y/n): y
----------------------------------------------------------------------
Press "y" to confirm the reboot operation.
10.12 Ping
Ping command will be used to test the Ethernet connection of router or Internet linking
condition. Move cursor " >> " to ping and press enter.
----------------------------------------------------------------------
Command: ping <ip> [1~65534|-t] [1~1999]
Message: Please input the following information.
IP address <IP> : 10.0.0.1
Number of ping request packets to send (TAB select): -t
Data size [1~1999]: 32
----------------------------------------------------------------------
There are 3 parameters for ping command:
<ip> [1~65534|-t] [1~1999]
IP address: The IP address which you want to ping.
Number of ping request packed to send, key TAB for further selection:
Default: It will send 4 packets only
1~65534: Set the number of ping request packets from 1 to 65534
-t : It will continuous until you key Ctrl+C to stop
Data Size: From 1 to 1999
GRT-101/401/402 User's Manual
- -
113
G.SHDSL Bridge/Router