Wan - Planet GRT-101 User Manual

You can set up the data rate by the multiple of 64Kbps where n is from 3 to 89.
If the router is 4 wire model and doesn't use on 2-wire mode, the line rate will double from
2-wire model's setting.
Annex A/B TCPAM-16
TCPAM-16
Annex AF/BG
TCPAM-32
10.16.2.4 Type
There are four types of SHDSL.bis Annex type, Annex-A, Annex-B, Annex-AF, and
Annex-BG.
10.16.2.5 Margin
Generally, you cannot need to change SNR margin, which ranges from -10 to 21. SNR margin
is an index of line connection. You can see the actual SNR margin in STATUS SHDSL.bis. The
larger SNR margin is, the better the line connection quality is. If you set SNR margin in the field
as 3, the SHDSL.bis connection will drop and reconnect when the SNR margin is lower than 3.
On the other hand, the device will reduce the line rate and reconnect for better line connection.
10.16.2.6 TCPAM
There are two TCPAM settings on SHDSL.bis: TCPAM-16 or TCPAM-32. In most cases, you
can set Auto. It can use TCPAM-16 or TCPAM-32 for Annex A/F or B/G. If using Annex A or B,
only TCPAM-16 can be used.
10.16.2.7 Probe
For adaptive mode, you have to Enable. The router will adapt the data rate according to the
line status.
10.16.2.8 TC Layer
There are two TC layer settings on this router: EFM layer and ATM layer. According to the
network connected: ATM based access networks or Ethernet based access networks
10.16.2.9 Clear
Clear command can clear CRC error count.

10.16.3 WAN

The router supports 8 PVC, private virtual circuit, and so you can set up eight WAN, such as
WAN1 to WAN8. Move the cursor " >> " to wan and press enter.
2-wire model
192~2304 kbps(n=3~36)
192~3840 kpbs (n=3~60)
768~5696 kpbs(n=12~89)
125 - -
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual
4-wire model
384~4608 kbps(n=6~72)
384~7680 kbps(n=6~120)
1536~11392 kbps(n=24~178)