Snmp - Planet GRT-101 User Manual

>> port
ip_pool
list
Telnet TCP Port:
Telnet TCP Port
Legal client IP Address pool:
Legal client IP Address pool
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Move the cursor to port and press enter. You can set up port number from 1 to 65534.
Move the cursor to IP Pool and press enter, there are sixteen legal IP addresses for telnet
access. The default legal address is 0.0.0.0. It means that there is no restriction of IP to access
the router via telnet. There are two sub-menus: modify and clear for easy to set up each one.
Move the cursor to list and press enter, you can view full listing on security profile including the
Telnet listing TCP port and 16 host IP address.

10.13.3 SNMP

Simple Network Management Protocol (SNMP) is the protocol not only governing network
management, but also the monitoring of network devices and their functions.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. This router supports MIB I & II.
Move the cursor " >> " to snmp and press enter.
>> community
trap
Configure telent TCP port
Legal address IP address pool
Show security profile
Configure community parameter
Configure trap host parameter
GRT-101/401/402 User's Manual
- - 116
G.SHDSL Bridge/Router