Utility - Planet GRT-101 User Manual

Update period (secs) (Enter for default) <3600> : 86400
----------------------------------------------------------------------
Move the cursor to time_zone and configure where your router is placed. The easiest way to
know the time zone offset hour is from your PC clock. Double click the clock at the right corner
of monitor and check the time zone of your country. It will show (GMT+XX:XX) or (GMT-XX.XX)
information.
----------------------------------------------------------------------
Command: admin sntp time_zone <-12~12>
Message: Please input the following information.
GMT time zone offset (hours) (Enter for default) : -8
----------------------------------------------------------------------
Time synchronization:
Method
SNTP V4.0 Service
Time Server 1
Time Server 2
Time Server 3
Update Rate
Time Zone
Move the cursor to list for review the SNTP setting.
----------------------------------------------------------------------
Status Window...
Time Synchronization Parameters
Method
Service
Time Server 1
Time Server 2
Time Server 3
Update Period
GMT Time Zone Offset
----------------------------------------------------------------------

10.14 Utility

There are three utility tools, upgrade, backup and restore, embedded in the firmware. You can
update the new firmware via TFTP upgrade tools and backup the configuration via TFTP
backup tool and restore the configuration via TFTP restore tool. For upgrade, TFTP server with
the new firmware will be supported by supplier but for backup and restore, you must have your
own TFTP server to backup and restore the file.
Move the cursor " >> " to utility and press enter.
>> upgrade
backup
Restore
□Sync with PC □SNTP V4.0
□Enable □Disable
: SNTP v4.0
: Enable
: ntp-2.vt.edu
: ntp.drydog.com
: ntp1.cs.wisc.edu
: 3600 secs
: 8 hours
Upgrade main software
Backup system configuration
Restore system configuration
GRT-101/401/402 User's Manual
121 - -
G.SHDSL Bridge/Router