Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Network Router
  5. GRT-101
  6. Quick installation manual

Planet GRT-101 Quick Installation Manual

G.shdsl bridge router
Hide thumbs Also See for GRT-101:

Advertisement

Quick Links

Download this manual See also: User Manual
G.SHDSL Bridge Router
GRT-101/GRT-401/GRT-402
Quick Installation Guide

Advertisement

loading

Related Manuals for Planet GRT-101

Summary of Contents for Planet GRT-101

  • Page 1 G.SHDSL Bridge Router GRT-101/GRT-401/GRT-402 Quick Installation Guide...

  • Page 2: Table Of Contents

    Table of Contents Chapter 1 Before Starting Up ................3 Chapter 2 Quick Installation ................4 2.1 Bridge Mode ................4 2.2 Routing Mode for PPPoA and PPPoE with IP Sharing ..... 6 2.3 Routing Mode for IPoA or EoA ............ 9 2.4 LAN-to-LAN Connection with Bridge Mode ........13...

  • Page 3: Chapter 1 Before Starting Up

    Chapter 1 Before Starting Up Before proceeding any further, please make sure correct Ethernet cable is used for connecting the LAN port of your computer to GRT-101/401/402. The LAN LNK indicator on the front panel will light up if a correct cable is used.

  • Page 4: Chapter 2 Quick Installation

    Bridge Mode IP 192.168.0.31 Mask 255.255.255.0 Gateway 192.168.0.254 DSLAM VPI = 0, VCI = 32 Encapsulation = LLC Web UI Configuration After connection via web browser, click to set up Bridging mode of GRT-101/401/402 and then click for the next setting.
  • Page 5 1. Enter WAN1 VPI: 0 and VCI: 32. 2. Select WAN1 AAL5 Encap: 3. Enter LAN IP: 192.168.0.1 4. Enter LAN Sub-net Mask: 255.255.255.0 5. Enter Gateway: 192.168.0.254 The Gateway is directly pointed to the BAS IP. 6. Enter DNS Server : 168.95.1.1 and 168.95.192.1 7.

  • Page 6: Routing Mode For Pppoa And Pppoe With Ip Sharing

    7 address  192.168.0.1  255.255.255.0  8. (back to root) write  y  y  (reboot) 2.2 Routing Mode for PPPoA and PPPoE with IP Sharing GRT-101 LAN IP 192.168.0.1 Mask 255.255.255.0 usrname: user1@net password: user Router Mode IP 192.168.0.2...
  • Page 7 4. DHCP Server: Enable 5. Click 6. Enter DHCP Client Start IP: 192.168.0.2 7. Enter DHCP Client End IP: 192.168.0.51 8. Enter DNS Server: 192.168.0.1 9. The DNS server is embedded in GRT-101/401/402. 10. Click to write the new setting.
  • Page 8 11. Enter WAN1 VPI: 0 and VCI: 32. 12. Select WAN1 AAL5 Encap: 13. Select: 14. Click 15. Enter User Name provided by ISP: user1@net 16. Enter Password provided by ISP: user1 17. Re-enter Password for confirmation: user1 18. The screen will prompt the new configured parameters. Check the param- eters and click .

  • Page 9: Routing Mode For Ipoa Or Eoa

     (reboot) 2.3 Routing Mode for IPoA or EoA WNA IP 10.1.2.1 LAN IP 192.168.0.1 Mask 255.255.255.0 Mask 255.255.255.0 Gateway 10.1.2.2 DNS 168.95.1.1 GRT-101 Router Mode IP 10.1.2.2 IP 192.168.0.2 Mask 255.255.255.0 Mask 255.255.255.0 Gateway 192.168.0.1 DSLAM VPI = 0, VCI = 32...
  • Page 10 Web UI Configuration For Route Mode with Classical IP over ATM and Ethernet over ATM, follow the following settings. First select , and then click setting other parameters. 1. Enter LAN IP: 192.168.0.1 2. Enter LAN Sub-net Mask: 255.255.255.0 3. Host Name: SOHO 4.
  • Page 11 6. Enter DHCP Client Start IP: 192.168.0.2 7. Enter DHCP Client End IP: 192.168.0.51 8. Enter DNS Server: 192.168.0.1 9. The DNS server is embedded in GRT-101/401/402. 10. Click to write the new setting. 11. Enter WAN1 VPI: 0 and VCI: 32.
  • Page 12 15. Enter WAN1 IP: 10.1.2.1 16. Enter WAN1 Subnet Mask: 255.255.255.0 17. Enter Default Route Gateway: 10.1.2.2 18. Enter DNS Server: 168.95.1.1 and 168.95.192.1 19. The screen will prompt the new configured parameters. Check the parame- ters and click . The router will reboot with the new setting or click to configure other parameters.

  • Page 13: Lan-To-Lan Connection With Bridge Mode

    Subnet mask: 0.0.0.0 Gateway: 10.1.2.2 8. (back to root) write  y  y  (reboot) 2.4 LAN-to-LAN Connection with Bridge Mode STU-R (CO) STU-C (CPE) GRT-101 GRT-101 Bridge Mode Bridge Mode LAN IP 192.168.0.1 LAN IP 192.168.0.2 Mask 255.255.255.0 Mask 255.255.255.0...
  • Page 14 1. Enter WAN1 VPI: 0 and VCI: 32. 2. Select WAN1 AAL5 Encap: 3. Enter LAN IP: 192.168.0.1 4. Enter LAN Sub-net Mask: 255.255.255.0 5. Enter Gateway: 192.168.0.2 6. Click...
  • Page 15 7. Set up the CO Router in bridge mode (refer to bridge mode in section 2.1). The gateway of CO Router is pointed to LAN IP, 192.168.0.2, of CPE Router. STU-C (CPE) side Follow the above instruction. The only difference in this configuration is that users have to choose CPE SIDE instead of CO SIDE.
  • Page 16 Console Configuration Do the following steps in STU-R side: 1. User: admin  password: admin  2. enable  supervisor password: root  3. setup  mode  Bridge  shdsl  STU-R  4. wan  Interface number (1~8) : 1  Protocol ...

This manual is also suitable for:

Grt-401Grt-402