Chapter 6 Administration; Security - Planet GRT-101 User Manual

G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual

Chapter 6 Administration

This session introduces security and simple network management protocol (SNMP) and time
synchronous.

6.1 Security

For system secutiry, suggest to change the default user name and password in the first setup
otherwise unauthorized persons can access the router and change the parameters.
There are three ways to configure the router, Web browser, telnet and serial console.
Press Security to set up the parameters.
For greater security, change the Supervisor ID and password for the router. If you don't set
them, all users on your network can be able to access the router using the default Supervisor
IP and Supervisor Password is "root".
You can authorize five legal users to access the router via telnet or console only. There are two
UI modes: menu driven mode and line command mode to configure the router. There are
two UI modes, menu and command mode for telnet or console mode to set up the Router. The
Menu means menu driven interface mode and Command means line command mode. We will
- - 76