10.13.4 Community
There are 5 entries of SNMP community that can be configured in this system.
Move the cursor to community and press enter.
----------------------------------------------------------------------------
--
Command: admin snmp community <1~5> <more...>
Message: Please input the following information.
Community entry number <1~5> : 2
----------------------------------------------------------------------------
--
The screen will prompt as follow:
>> edit
list
Move the cursor to edit and press enter. You can setup the following:
Validate
: Set Enable or Disable
Community
: Key in the string
Access right : Set Read only, Read Write or Denied
Move the cursor to list and press enter, you can view full listing on SNMP Community Pool.
5 entries of SNMP trap are allowed to be configured in this system.
SNMP Community:
SNMP entry(1~5)
□Enable
Validate
Community
□Read only
Access Right :
10.13.4.1 Trap Host
Move the cursor to trap and press enter.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit
list
Move the cursor to edit and press enter, you can setup the following:
Version
: Disable, 1 or 2
Trap host IP address : Key in the IP address
Community
: Key in the string
SNMP Trap Host:
Trap Host entry(1~5)
Version
IP Address
Edit community entry
Show community configuration
□Disable
□Read Write
Edit trap host parameter
Show trap configuration
□Disable □Ver.1
GRT-101/401/402 User's Manual
□Denied
□Ver.2
- -
117
G.SHDSL Bridge/Router