Planet GRT-101 User Manual page 81

To send logs to the LOG server, you must configure the other servers from your network to
send logs to that server.
Syslog Service setup
1. Check the enable item of Syslog Server Service to turn on syslog service.
2. Select the syslog server facility. The log facility allows you to send logs to different files in
the syslog server.
Syslog Server Setup
3. Specify a server name to which all syslog messages will be sent.
4. Specify a UDP port number to which the syslog server is listening. The default value is 514.
Make sure this is not blocked from your firewall.
Press Finish to finish the setup. The browser will prompt the configured parameters and check
it before writing into NVRAM.
GRT-101/401/402 User's Manual
- - 81
G.SHDSL Bridge/Router