Show - Planet GRT-101 User Manual

LAN
---------- ----
State
F
Priority 128
Path Cost 100
<Hint> D-Disable, B-Blocking, LS-Listening, LN-Learning, F-Forwarding.
-----------------------------------------------------------------------------
You can view all STP status on all LAN and WANs ports.
The STP state per LANs and WANs are as following:
Blocking - A port that would cause a switching loop, no user data is sent or received but it may
go into forwarding mode if the other links in use were to fail and the spanning tree algorithm
determines the port may transition to the forwarding state. BPDU data is still received in
blocking state.
Listening - The switch processes BPDUs and awaits possible new information that would
cause it to return to the blocking state.
Learning - While the port does not yet forward frames (packets) it does learn source
addresses from frames received and adds them to the filtering database (switching database)
Forwarding - A port receiving and sending data, normal operation. STP still monitors incoming
BPDUs that would indicate it should return to the blocking state to prevent a loop.
Disabled - Not strictly part of STP, a network administrator can manually disable a port.
10.8.8 Clear
Move cursor " >> " to Clear and press enter.
You can clear all statistics by this command.
-----------------------------------------------------------------------------
Command: status clear <CR>
Message: Clear OK!
-----------------------------------------------------------------------------

10.9 Show

You can view the system information, configuration and configuration in command script by
show command.
Move cursor " >> " to show and press enter.
WAN1 WAN2 WAN3
---- ---- ----
D D D
128 128 128
500 500 500
- - 111
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual
WAN4 WAN5 WAN6
---- ---- ----
D D D
128 128 128
500 500 500
WAN7 WAN8
---- ----
D D
128 128
500 500