Bandwidth Manager Rear Panel - Planet BM-2010A User Manual

1.4 Bandwidth Manager Rear Panel

- Rear View of BM-2100:
WAN Port
Port
Power
On/Off Switch
LAN Port
WAN Port
Console
- Rear View of BM-2010A
WAN Port
Port
Power
On/Off Switch
LAN Port
WAN Port
CONSOLE
RESET
LAN Port
Function
This is where you will connect the AC
power cord. 100~240VAC is allowed.
You can turn on/off this device by the
switch when the power cord is connected
This is where you will connect the RJ-45
line to your local switch or device. This
port is MDI interface
This is where you will connect the RJ-45
line to your router or ISP. This port is
MDI interface
This port is reserved for manufacturer use
only
WAN
LAN Port
Console
Function
This is where you will connect the AC
power cord. 100~240VAC is allowed.
You can turn on/off this device by the
switch when the power cord is connected
This is where you will connect the RJ-45
line to your local switch or device.
This is where you will connect the RJ-45
line to your router or ISP.
This port is reserved for manufacturer use
only
Press this button to reset the settings back
to factory default
BM-2010A / BM-2100 Bandwidth Manager User's Manual
Console Port
LAN
CONSOLE
DIP
115200, N, 8, 1
DIP
- 5 -
Console
19200, N, 8, 1
AC line :
100~240V AC
50/60Hz
On / Off
100~240V AC
50/60 Hz
RESET
On / Off
Reset
Power
Power