Mod./P.shift - Korg PA1X User Manual

Mod./P.Shift

Other modulation and pitch shift effects
032: Tremolo
This effect modulates the volume level of the input signal. The
effect is stereo, and offsetting the LFO of the left and right phases
from each other produces a tremolo effect between left and
right.
Stereo In - Stereo Out
Left
Right
LFO: Tri/Sin/Vintage/Up/Down LFO Shape
LFO Waveform
Selects LFO Waveform
a
LFO Shape
Determines how much the LFO waveform is changed
LFO Phase [degree]
b
Sets the LFO phase difference between the left and right
LFO Frequency [Hz]
Sets the LFO speed
Src
c
Selects the modulation source of LFO speed
Amt
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using the
tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base Note
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Depth
Sets the depth of LFO modulation
Src
e
Selects the modulation source of the depth of modulation
Amt
Sets the modulation amount of the depth of modulation
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 330
Src
f
Table , "Selects the modulation source of the effect balance," on page 330
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 330
Wet / Dry
Tremolo
Tremolo
Wet / Dry
LFO Phase
Triangle, Sine, Vintage, Up, Down
☞
–100...+100
☞
Fx:020
–180...+180
☞
0.02...20.00Hz
☞
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
☞
Fx:009,
MIDI, 40...240
☞
Fx:009
☞
Fx:009
x1...x16
☞
Fx:009
0...100
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
a:LFO Waveform
This parameter selects the LFO waveform. Vintage wave simu-
lates the characteristics of the tremolo created on a guitar ampli-
fier. Combining this effect with the Amp Simulation will make a
realistic, vintage tremolo amplifier sound.
Triangle
Sine
b: LFO Phase [degree]
This parameter determines the difference between the left and
right LFO phases. A higher value will simulate the auto-pan effect
in which the sound is panned between left and right.
033: Envelope Tremolo
This effect uses the input signal level to modulate a stereo trem-
olo. You can simulate a tremolo effect that becomes deeper as it
fades out while the level gets lower.
Stereo In - Stereo Out
Left
Right
LFO: Tri/Sin/Vintage
+
Envelope Envelope Shape
Envelope Sens
Envelope Sens (Envelope Sensitivity)
Sets the envelope sensitivity of the input signal
a
Envelope Shape
Sets the envelope curve shape of the input signal
LFO Waveform
Selects LFO Waveform
b
LFO Shape
Determines how much the LFO waveform is changed
LFO Phase [degree]
c
Sets the LFO phase difference between the left and right
LFO Frequency [Hz]
Sets the LFO speed
d
Envelope Amount [Hz]
Sets the changes of the LFO speed according to the input signal level
Depth
Sets the depth of LFO modulation
e
Envelope Amount
Sets the changes of the modulation depth according to the input signal level
☞
Wet/Dry
Table , "Sets the balance between the effect and dry sounds," on page 330
Src
f
Table , "Selects the modulation source of the effect balance," on page 330
Amt
Table , "Sets the modulation amount of the effect bal-
ance," on page 330
Effects 349
Mod./P.Shift
Tremolo - LFO Waveform
Vintage Down
Up
Wet / Dry
Tremolo
Tremolo
Wet / Dry
LFO Phase
LFO Shape
0...100
–100...+100
Triangle, Sine, Vintage
–100...+100
☞
Fx:020
–180...+180
☞
Fx:032
0.02...20.00Hz
–20.00...+20.00Hz
☞
0...100
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
☞
☞