Page Menu - Korg PA1X User Manual

Page menu

Press the page menu icon to open the menu. Press a command to
select it. Press anywhere in the display to close the menu without
selecting a command.
Write Global-Seq. Setup
Select this command to open the Write Global-Seq. Setup dialog
box, and save global settings that are unique to the Sequencer
mode. (See "Write Global-Sequencer Setup dialog box" on
page 188).
Load Song
Select this command to open the Song Select window, and load a
Song to the sequencer. (See "Song Select window" on page 188).
Please note that in Sequencer mode the file is loaded to memory
– contrary to Song Play mode, where Songs are read directly
from disk.
Save Song
Select this command to save the new or edited Song to disk as a
Standard MIDI File. The file is automatically added the ".MID"
extension. After selecting this command, the Save Song page
appears (see "Save Song window" on page 188).
Warning: Turning the instrument off will delete the Song from
memory. Save your Song to disk to avoid losing it.
Warning: The Song is also lost when switching from Sequencer to
Style Play or Song Play mode, without previously saving the Song
to disk.
Undo
When selecting this command, the latest operation is canceled,
and data are reverted to the previous situation.
Overdub Step Recording
Only available in Record mode. Select this command to enter
Overdub Step Record mode. This recording mode lets you enter
events one at a time, adding events to the existing events. (See
"Record mode: Step Record page" on page 171).
Sequencer operating mode
Overwrite Step Recording
Only available in Record mode. Select this command to enter
Overwrite Step Record mode. This recording mode lets you
enter events one at a time, overwriting all existing events. (See
"Record mode: Step Record page" on page 171).
Delete Song
Select this command to delete the Song and create a new, blank
Song.
Delete Current Track
Select this command to delete the track currently selected in the
Track area (see "Track volume/status area" on page 170).
Solo Track
Select the track to be soloed, and check this item. You will hear
only the selected track, and the 'Solo' warning will flash on the
page header.
Uncheck this item to exit the Solo function.
Copy/Paste FX
You can copy a single, or all four effects, between Styles, Perfor-
mances, STSs and Songs. To do this, choose the "Copy FX" and
"Paste FX" commands from the page menu of the Style Play,
Song Play or Sequencer modes.
To copy a single effect:
1. Select the source Song, Performance, Style or STS, then
• go to the page of the single effect you want to copy (FX A,
FX B, FX C, or FX D), or
• go to the Effects > FX Select page, to copy all four effects.
This may be useful if you want to copy each of the four
effects into different Performances, Styles or STSs.
2. Choose the "Copy FX" command from the page menu.
3. Select the target Performance, Style or STS, then go to the
page of the single effect you want to paste (FX A, FX B, FX
C, or FX D).
4. Choose the "Paste FX" command from the page menu.
To copy all four effects:
1. Select the source Performance, Style or STS, then go to the
Effects > FX Select page, to copy all four effects.
2.
Choose the "Copy FX" command from the page menu.
3. Select the target Performance, Style or STS, then go to the
page of the Effects > FX Select page.
4. Choose the "Paste FX" command from the page menu.
Exit from Record
Only available in Record mode. Select this command to exit the
Record mode, and go back to the Main page of the Sequencer
Play mode (see "Sequencer Play - Main page" on page 166).
187
Page menu