Edit Menu; Sampling: Record - Korg PA1X User Manual

216 Sampling operating mode

Edit menu

the new Sample, and save it to the PCM folder on the hard
disk.
• To create a series of separate percussive samples fro an
audio groove, and a MIDI Groove, go to the Time Slice
page. After creating a series of slices, use the Extend func-
tion to refine your groove. Select the Write command from
the page menu, to save the sliced samples and the MIDI
Groove to disk.
10. After saving, press the MENU button and go to the "Multi-
sample" section, to assign the sample(s) to a multisample.
Assign each sample to a different keyboard zone of the
multisample.
11. When finished editing the multisample, select the Write
command from the page menu. The Write Multisample
dialog box will appear (see "Write MultiSample dialog box"
on page 226). Assign a name to the new multisample, and
save it to the internal memory (SSD).
12. Press RECORD to exit the Sampling mode and return to
the Sound mode.
• To access the new multisample, first select an ordinary
Sound. Press MENU and go to the "Basic: OSC Basic" page
(see page 194). Select one of the available layers, then select
the RAM bank of multisamples. Finally, select the new
multisample.
• To access the new sample(s), you must assign it to a Drum
Kit. First select a Drum Kit. Press MENU and go to the
"DrumKit: Sample Setup (Drum Kits)" page (see
page 195). Select a key and a layer, then select the RAM
bank of samples. Finally, select the new sample.
13. Select the Write Sound command from the page menu, and
save the Sound to an empty User location.
14. Assign the new Sound to a Style track (preferably, the
Drum or Percussion track), then select the "Save Current
Style Perf." command from the page menu, to save the Style
Performance.
15. If the new Sound is based on an audio groove, use the
"Import: Import Groove" function in the Style Record
mode (see page 121) to import the generated MIDI Groove
to the Style track you assigned the new Sound to.
Warning: Generated MIDI Grooves will be deleted when
turning the instrument off. Import them to a Style track
before turning the instrument off.
Edit menu
From any page of the Sampling mode, press the MENU button
to open the Sampling edit menu. This menu gives access to the
various Sampling edit sections.
When in the menu, select an edit section, or press EXIT to exit
the menu and return to the Sample Edit / Sample Record page.
To return to this page, you can also select the Sample Edit / Sam-
ple Record menu item.
Each item in this menu corresponds to an edit section. Each edit
section groups various edit pages, that may be selected by press-
ing the corresponding tab on the lower part of the display.

Sampling: Record

This page allows you to record a 16-bit, 48kHz stereo or mono
sample.
SM (Sample)
Press this area to open the Choose Sample window, and select
one of the available samples in the RAM memory for editing.
Select one of the available samples. The window will be automat-
ically closed after selecting.