Audio Inputs; Midi Connections; Damper Pedal; Demo - Korg PA1X User Manual

Hide thumbs Also See for PA1X:
Table of Contents

Advertisement

Note: When a track is sent to the OUTPUT 1 or 2, it is removed
from the main mix going to the internal speakers and the LEFT/
MONO & RIGHT OUTPUTS.
Note: OUTPUTs 1 & 2 are not effected.
Adjust the volume of the LEFT/MONO & RIGHT OUTPUTs
with the MASTER VOLUME slider. Adjust the volume of the 1 &
2 OUTPUTs with the mixer's or external speaker's level controls.

Audio Inputs

Connect your microphone, guitar, or any other musical instru-
ment, to the INPUTs on the back of the instrument. The micro-
phone signal may also be sent to the Voice Processor for
sophisticate processing.
Depending on the connected device(s), you must choose a suit-
able signal routing, by using the 1/MIC switch in the INPUT sec-
tion. Select the "MIC" position to connect a microphone to the
MIC input, or the "1" position to connect a mono or stereo line-
level source (like a synthesizer or an external CD player) to the 1
& 2 INPUTs.
See the "Singing with a connected microphone" chapter on
page 64, and the "Audio Output: Audio In" section on page 240,
for more information on connecting and setting the inputs and
the audio source.

MIDI connections

You can play the internal sounds of your Pa1X with an external
controller, i.e. a master keyboard, a MIDI guitar, a wind control-
ler, a MIDI accordion, or a digital piano.
You can also control other MIDI devices with the Pa1X, or con-
nect it to a computer for use with an external sequencer.
See the "MIDI" chapter for more information on MIDI connec-
tions.

Damper Pedal

Connect a Damper (Sustain) pedal to the DAMPER connector
on the back panel. Use a Korg PS1, PS2 or DS1H footswitch
pedal, or a compatible one. To switch the Damper polarity, see
"Damper Polarity" on page 235

Demo

Listen to the built-in Demo Songs to appreciate the power of the
Pa1X. There are several Demo Songs to choose from.
1.
Press the STYLE PLAY and SONG PLAY buttons together.
Their LEDs start blinking.
At this point, if you don't press any other button, all the Demo
Songs will be played back.
2.
Select one of the available options, to listen to a specified
Demo Song.
3.
Stop the Demo by pressing the STOP button on the display,
or by exiting the Demo mode by pressing any MODE but-
ton.

The music stand

A music stand comes standard with your Pa1X. Insert its legs
into the two dedicated holes on the rear panel.
Start up
19
Audio Inputs

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa1xpro

Table of Contents