Copy - Korg PA1X User Manual

268 Disk edit mode

Copy

Creating a new ".SET" folder
Pa1X proprietary data must be saved in special folder with the
".SET" extension. These special folders can be saved inside ordi-
nary folders.
When saving, you can save onto existing ".SET" folders, or you
can create a new folder of this type. Here is how to do it.
1. When the directory of the target device is shown in the dis-
play, the "New SET" button appears among the buttons
below the file list.
2. Press the New SET button. A dialog box appears, asking
you to enter a name for the new ".SET" folder.
3. Press the (Text Edit) button to open the Text Edit win-
dow. Enter the name, then press OK to confirm and close
the Text Edit window.
4. Press OK to create the new folder and exit the dialog box.
Copy
In this page you can copy files and folders. Folders can be generic
or ".SET" folders. In addition, you can copy the content of the
generic folder you are in. You can copy inside the same device, or
from a device to a different one.
To preserve the data structure integrity, during Copy operations
you can't open ".SET" folders and copy only one of the files it
contains. You can only open generic folders.
Copying a folder's content
If nothing is selected while a folder is open in the display, you
can copy the folder's content, without copying the folder itself.
Note: During the Copy procedure, you can't open a ".SET" folder.
You can, however, open any generic folder.
1. If copying from or to a floppy disk, insert the disk into the
disk drive.
2. Select the source device, by using the Device pop-up menu.
3. If the folder you are looking for is inside another folder,
select this latter and press the Open button to open it. Press
the Close button to go back to the parent folder.
4. To copy the current folder's content, without copying the
folder itself, do not select anything in the display.
5. Press Copy To to confirm. The target device appears.
Note: If the selected device is not available, the "Device not
found, or unknown format" message will appear. A different
device will be automatically selected.
6. If needed, select the target device, by using the Device pop-
up menu.
7. If you want to select a different folder, use the Open and
Close buttons to move through the directories.
• To copy into an existing generic folder (not a ".SET"
folder), select that folder.
• To copy into the current folder, do not select anything.
8. Once the target is selected, press Copy.
If a file or folder with the same name of the source data
already exists at the target location, the "Overwrite" dialog
box will appear (see "Overwriting existing files or folders"
on page 269).