Sub-Scale Panel; Pad Panel; Split Panel - Korg PA1X User Manual

VP lock icon
This lock avoids changing the Voice Processor Preset when
selecting a different Performance, STS or SongBook entry. This
is useful if you want to use the same Preset while selecting differ-
ent Performances, STSs or SongBook entries.
This lock is reset when turning the instrument off, unless you
write Global settings to memory (see "Write Global - Global
Setup dialog box" on page 257).
For more information on parameter locks, see "General Con-
trols: Lock" on page 232.

Sub-Scale panel

Press the Sub-Scale tab to select this panel. This panel replicates
the "Mixer/Tuning: Sub Scale" edit page (see page 86).

Pad panel

Press the Pad tab to select this panel. This is where you can
assign a different Hit or Sequence Pad to each of the four pads,
and see at a glance how pads are programmed. For more
options, go to the "Pad/Switch: Pad" page (see page 94).
Pad
assignment
Older
sounds
Pad assignment
Name of the Hit or Sequence assigned to each Pad. Press the box
to make the Pad Select window appear (see "Pad Select window"
on page 75).
Older sounds
To warrant compatibility with data generated prior to OS ver-
sion 2.0, the name of the older sounds assigned to the Pads is
shown under each Pad assignment box. As soon as you select a
new Hit or Sequence, the name of the older sound disappears.
Volume ... D Send
Volume, Pan, Send to the FX C and D values for each of the four
Pads.
Pads lock icon
When locked, assignements to the pads remain unchanged when
selecting a different Performance or STS.
Style Play operating mode
This lock is reset when turning the instrument off, unless you
Gbl
write Global settings to memory (see "Write Global - Global
Setup dialog box" on page 257).
For more information on parameter locks, see "General Con-
trols: Lock" on page 232.

Split panel

Press the Split tab to select this panel. This is where you can set
the split point and Chord Recognition mode.
Split Point
Use this parameter to select a different split point. A full-range
piano keyboard is shown in the display, divided at the selected
split point. Upper tracks play on the right of this point, while the
Lower track plays on the left.
Keyboard diagram
Touch anywhere on the keyboard diagram. A message will
appear, asking you to press the new split point on the keyboard
of your Pa1X (or to press the EXIT button to close the message
with no changes).
Chord Recognition Mode
This parameter allows you do decide how chords are recognized
by the auto-accompaniment engine. Please note that when in
Full or Upper Chord Scanning mode, the Fingered 3 mode is
always selected, and you must always play at least three notes, to
let a chord be recognized.
For more information on the various options, see "Chord Rec-
ognition Mode" on page 95.
SB
Note: This parameter is the same you can find in the "Preferences:
Style Preferences" page (see page 95).
Split Point and Chord Recognition lock icons
SB
When locked, Split Point and Chord Recognition mode remain
unchanged when selecting a different Performance or STS.
These locks are reset when turning the instrument off, unless
you write Global settings to memory (see "Write Global - Global
Setup dialog box" on page 257).
For more information on parameter locks, see "General Con-
SB
trols: Lock" on page 232.
Gbl
83
Sub-Scale panel
Gbl