400
Installing additional RAM
5.
Remove the existing module (B), by gently rotating it forward as
shown in the diagram.
6.
Insert the new SIMM module (C) into the slot that was origi-
nally empty, as shown in the diagram. Line up the lower side of
the module with the slot base, then rotate the module up, and
delicately push until it is firmly seated in place. Be sure the mod-
ule is correctly inserted. If not, extract it and repeat the opera-
tion.
7.
Now re-insert the SIMM module (B) that you removed in step
5, using the same method as used with the new module (C).
8.
Close and secure the compartment cover by reversing the opera-
tions seen on step 2.
B
C
B