Page Menu - Korg PA1X User Manual

276 Disk edit mode

Page menu

Write CD dialog box
This dialog box allows you to set the parameters for CD writing.
Speed
Use this pop-up menu to select the writing speed. Depending on
the blank CD quality, higher speeds may also mean less-reliable
data writing.
Simulation
When this parameter is checked, the CD will not be actually
written. Instead, a simulation procedure will start, to let you see
if the writing speed is too high, and should be lowered.
While in simulation mode, the Write CD dialog box's title will
change to "Write CD - Simulation Mode".
At the end of the simulation procedure, the CD is automatically
ejected.
Close CD
With operating system version 2.0, Pa1X can only write a single
session on a CD. However, the CD can be left open, to let you
add other sessions from a PC or Mac on the same CD.
• Check this parameter if you want to close ("finalize") the
CD. When the CD is closed, you cannot add further data to
it. This is useful when the CD's content is complete and the
disk must be delivered or archived.
• Leave it unchecked if you want to add further data later.
Note: If this parameter is not checked, Pa1X needs an additional
13MB (approx.) of space on the CD. However, if this space is not
available, the disk is automatically closed (and this parameter is
automatically checked).
Note: While Pa1X-generated CDs, left open for further addition of
data, can be used by most CD-burning applications, we cannot
warrant full compatibility with them, due to the fast-changing way
their features are implemented.
Cancel
Exits from the dialog box, and returns to the previous page.
CD Info
Select this command to see various info on the selected CD.
Write CD
Press this button to start writing the CD, or the Simulation pro-
cedure. You will be asked to insert a blank CD into the CD
Writer.
In case you insert a CD-RW (rewritable) containing data, you
are asked if you want to delete all its content. Warning: This will
delete all the data already contained on the CD-RW!
Note: If the Write operation fails on a rewritable CD (CD-RW),
the CD is automatically erased. Please try again with a slower writ-
ing speed. If this doesn't work, go to the Disk > Format page, and
perform a Full Format of the CD.
Page menu
Press the page menu icon to open the menu. Press a command to
select it. Press anywhere in the display to close the menu without
selecting a command.
Create New Folder
This command lets you create a new folder in the root of any
disk, or inside any generic folder. You can't create or open ".SET"
folders with this command, since these are reserved folders, to be
created during a Save operation by using the New SET button.
By pressing the (Text Edit) button you can open the Text
Edit window. Enter the name, then press OK to confirm and
close the Text Edit window.
Rename
Available only when an item is selected in a file list.
Use this function to change the name of a file or folder. To pre-
serve consistency through the data structure, you cannot rename
single files inside a ".SET" folder. Also, you cannot change the 3-