Effects; Diagrams; Dynamic Modulation Sources - Korg PA1X User Manual

Effects

Pa1X is equipped with four powerful Effect Processors. You can
send them the internal tracks, or any signal entering the Audio
Inputs.

Diagrams

The following instructions show the signal path diagram for
each of the effect types. The signal coming from the tracks
(Send) is mono. Before entering an effect processor, it is split in
two "wires" (Left and Right), and processed in stereo. The signal
is then output in stereo from the effect processor, and sent to the
Mix output (Left&Right, the heaphones or the internal speak-
ers).
Effect Block
Diagram
Send

Dynamic Modulation sources

When the symbol is encoutered, a Dynamic Modulation
can be applied to the corresponding parameter. The following
table shows the available modulation sources.
Modulation source Note
Off No modulation
Gate1
Gate1+Dmpr
Gate2
Gate2+Dmpr
Note Nr Note Number
Velocity Note Velocity
AfterTouch After Touch
JS X Joystick Left/Right
JS+Y: CC#01 Joystick Forward
JS-Y: CC#02 Joystick Backward
MIDI(CC#04)
MIDI(CC#12)
MIDI(CC#13)
MIDI(CC#16)
MIDI(CC#18)
MIDI(CC#17)
MIDI(CC#19)
MIDI(CC#20)
MIDI(CC#21)
Damper: #64
Prta.SW: #65 Portamento Switch
Modulation source
Sostenu: #66
MIDI(CC#80)
MIDI(CC#81)
MIDI(CC#82)
MIDI(CC#83)
Tempo
Some notes on the Gate parameters follow.
Gate1, Gate1+Dmpr (Gate1+Damper)
The effect is at maximum during note-on, and will stop when all
keys are released. With Gate1 + Dmpr, the effect will remain at
maximum even after the keys are released, as long as the damper
Left
(sustain) pedal is pressed.
Right
Gate2, Gate2+Dmpr (Gate2+Damper)
This is essentially the same as for Gate 1 or Gate 1 + Dmpr.
However when Gate 2 or Gate 2 + Dmpr are used as a dynamic
modulation source for the EG of 022: St. Envelope Flanger etc.
or the AUTOFADE of 027: Stereo Vibrato, a trigger will occur at
each note-on. (In the case of Gate 1 and Gate 1 + Dmpr, the trig-
ger occurs only for the first note-on.)
Effects
Diagrams
Note
Sostenuto Pedal
Gate1,Gate1+Dmpr
Dmpr
1 2 1 3 2 3
Note
Damper Pedal
On
Off
Gate1
Gate1+Dmpr
Time
Gate2,Gate2+Dmpr
Dmpr
1 2
1 3 2 3
Note
Damper Pedal
On
Off
Gate2
Gate2+Dmpr
Time
329