Volume Panel; Jukebox Panel - Korg PA1X User Manual

Volume panel

Press the Volume tab to select this panel. This is where you can
set the volume of each track, and mute/unmute tracks.
Use the TRK. SEL. (TRACK SELECT) button to switch from
Normal (Keyboard and Mic/In tracks) to Song Tracks 1-8 and
Song Tracks 9-16 views.
If the VOLUME LED above the SLIDER MODE button is turned
on, the Assignable Sliders LEDs show which view is currently
selected.
The Normal view shows grouped Style tracks, Mic/In controls,
Keyboard tracks (upper sliders LED turned on):
The Song Tracks 1-8 view shows individual Song tracks 1-8
(third sliders LED turned on):
The Song Tracks 9-16 view shows individual Song tracks 9-16
(last sliders LED turned on):
Track status icon
Virtual sliders (track volume)
Virtual sliders are a graphical display of each track's volume. Use
the Assignable Sliders to change this value (provided the VOL-
UME LED is turned on above the SLIDER MODE button, see
below).
As an alternative, press the track's area to select a track, and use
TEMPO/VALUE controls to change the value.
The volume of Keyboard tracks may be saved to a Performance.
Assignable Sliders function
Use the SLIDER MODE button to select the function assigned to
the Assignable Sliders. When the VOLUME LED is turned on,
Virtual slider
SB
SB
Song Play operating mode
each Assignable Slider controls the volume of the corresponding
track.
The assigned function may be saved to a Performance. There-
fore, when selecting a Performance, the assigned function may
change.
Track status icons
Play/mute status of the current track. Select the track, then press
this area to change the track status. The status of Keyboard
tracks may be saved to a Performance or STS.
See "Keyboard track status" on page 141 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Track names
Under the sliders, a label for each track is shown. Use the TRK.
SEL button to switch between the various track views.
MIC/IN Audio inputs. [*]
UPPER1...3 Upper tracks.
LOWER Lower track.
T01...T16 Song tracks. [*]
[*] Volume for these tracks is not memorized.

Jukebox panel

When a Jukebox (JBX) file is assigned to Sequencer 1, you can
use the list shown in this panel to browse the Jukebox list, and
press the Select button in the display to select a Song to play. This
way, you can select any Song in the list as your starting Song, and
manually change the order of the Songs to play.
Note: A Jukebox file can be assigned to Sequencer 1 only.
Note: This panel is only available after loading a Jukebox file.
Hint: To create or edit a Jukebox file, go to the Jukebox Edit page
(see page 151).
Warning: Should you delete a Song included in the Jukebox list
currently in play, the sequencer will stop, and the "No Song" mes-
sage will appear. At this point, you can select the JukeBox tab to
open the Jukebox panel, and select a different Song.
As an alternative, you can select the next Song by pressing SHIFT +
>> (FAST FORWARD) in the SEQUENCER 1 section of the con-
143
Volume panel
SB