Korg PA1X User Manual page 171

Page menu icon
Press the page menu icon to open the menu. See "Page menu" on
page 187 for more information.
Song area
This is where Song name is shown, together with its tempo and
meter parameters, and the current measure.
Song type icon Song name
Meter
Song type icon
In Sequencer mode, only Standard MIDI Files (files with the
".MID" or ".KAR" extension) can be loaded.
Song name
Displays the name of the selected Song. "No Song" means that a
new (blank) Song is selected, and you can record it.
Touch the Song name to make the Song Select window appear,
allowing for selection of a different Song (see "Song Select win-
dow" on page 76).
To select a Song, you can also press the SELECT button in the
SEQUENCER 1 section of the control panel. Press SELECT a
second time to select a Song by dialing in its ID number (see
"Selecting a Song by its ID number" on page 77).
Meter
Current Song meter.
Measure number
Current measure number.
Tempo
Metronome tempo. Select this parameter and use the TEMPO/
VALUE controls to change the tempo. As an alternative, when a
different parameter is selected, or you are in a different page,
keep the SHIFT button pressed and use the DIAL to change the
tempo of the sequencer.
Metro
Check this box to turn the metronome on during playback.
Tempo (Tempo mode)
Use this menu to select the Tempo change mode.
Manual In this mode, you can change the Tempo using
TEMPO/VALUE section controls. The Song will
be played back using the manually selected
tempo.
Auto The Tempo recorded to the Song will be used.
Selected track info area
This line lets you see the Sound assigned to the selected track.
Not only it is shown on the main page, but also in several edit
pages.
Track name
Current mea-
Track name
sure
Name of the selected track.
Tempo
Sound name
Sound assigned to the selected track. Press anywhere in this area
to open the Sound Select window, and select a different Sound.
Sound bank
Bank the selected Sound belongs to.
Program Change
Program Change number. Shown only when the "Show Program
Change number" parameter is turned on in Global mode (see
page 234).
Sounds area
This area lets you see Sounds and octave transposition for the
eight tracks currently displayed.
Octave icon
Song track octave transpose
Non editable. Octave transpose of the corresponding track. To
edit the octave transpose, go to the "Mixer/Tuning: Tuning" edit
page (see page 180).
Sound name
Name of the Sound assigned to the track. Touch a name a first
time to select the corresponding track (detailed information are
shown on the Selected Track Info area, see above). Touch it a sec-
ond time to open the Sound Select window.
Track volume/status area
This area is where you can set the volume of each Song track,
and mute/unmute tracks.
Use the TRK. SEL. (TRACK SELECT) button to switch between
Song Tracks 1-8 and Song Tracks 9-16 views.
Sequencer operating mode
Sequencer Play - Main page
Sound bank
Sound name
Sound name
167
Program Change