Page Menu; Write Sound Dialog Box - Korg PA1X User Manual

Page menu

Press the page menu icon to open the menu. Press a command to
select it. Press anywhere in the display to close the menu without
selecting a command.
Write Sound
Select this command to open the Write Sound dialog box, and
save all editing parameters to a Sound.
See "Write Sound dialog box" on page 211 for more informa-
tion.
Solo Oscillator
Select this command to solo the selected oscillator, and mute the
other oscillators. Select it again to unmute the other oscillators.
When this function is activated, the "Solo OSC [n]" indicator (n
= oscillator number) blinks on the page header. While in this sit-
uation, you can select a different oscillator to be soloed.
Swap LFO
Select tis command to replace LFO1 with LFO2, and vice-versa.
Copy Oscillator
Select this command to copy all settings between oscillators.
See "Copy Oscillator dialog box" on page 212 for more informa-
tion.
Copy FX
Select this command to copy all FX settings from another
Sound.
See "Copy FX dialog box" on page 212 for more information.
Copy Drum Kit
Select this command to copy the Drum Kit from a different
Drum Kit.
See "Copy Drum Kit dialog box" on page 212 for more informa-
tion.
Init Sound
Select this command to delete all parameters, and set them to a
default value.
Compare
When this command is checked, original Sound parameter val-
ues are temporarily recalled, to compare them with edited
Sound operating mode
parameters. You cannot edit the Sound while you are in Com-
pare mode.
While this function is on, the Compare indicator blinks on the
page header.

Write Sound dialog box

Open this window by selecting the Write Sound item from the
page menu. Here, you can save all Sound parameters to a Sound
location in memory.
Warning: If you write over an existing Sound, the Sound will be
deleted and replaced by the one you are saving ("overwrite").
Please save on disk any User Sound you don't want to lose.
Note: DrumKits cannot be written over standard Sounds, nor vice
versa.
Note: To save over a Factory Sound location, unckeck the Factory
Sound Protect parameter in Disk mode (see "Factory Sound Pro-
tect" on page 272).
Warning: When replacing a Factory Sound, please be warned
that all Performance, STSs, Styles and Songs making use of it
will be modified as well. Use this feature with great care!
To restore the original data, please reload the original Musical
Resources (ver. 2.5 or higher), freely available from our web site
(www.korgpa.com).
Name
Name of the Sound to be saved. Press the
next to the name to open the Text Edit window.
Sound Bank
Target bank of Sounds. Each bank corresponds to one of the
PERFORMANCE/SOUND buttons. Use TEMPO/VALUE con-
trols to select a different bank.
Sound
Target Sound location in the selected bank. Use TEMPO/VALUE
controls to select a different location.
Select... button
Press this button to open the Sound Select window, and select a
target location.
211
Page menu
(Text Edit) button