Installing the MP3 Board (EXBP-MP3)
You can install a Korg EXBP-MP3 board into your Pa1X or Pa1X
Pro. This user-installable card will let your Pa1X and Pa1X Pro
play and record MP3 files, allowing for easy music data exchange
with any personal computer or stand-alone MP3 player.
Please note Korg is not responsible for any damage or injury caused by
incorrect installation of this card by unauthorized personnel.
Precautions
• Installation of the card is done at the user's own risk. Korg will assume no
responsibility for any damage or injury resulting from its improper installa-
tion or use.
• Be sure to disconnect the instrument from the AC plug, before opening it.
• To prevent your body's static electricity from damaging the board's compo-
nents, touch an unpainted metallic component before proceeding with the
installation.
Installing the MP3 Board (EXBP-MP3)
Part listing
Before beginning with the installation, please be sure all the following parts
are included with your kit. Some parts are needed only when installing the
board on a particular model, but not on others. In addition, you will need a
cross-point screwdriver (Pa1X/Pa1X Pro) and a 5.5mm hexagon wrench or a
pair of pliers (Pa1X Pro) (not supplied).
A
C
Part name
A
Self-locking nuts
B
Plastic spacers
C
MP3 card
D
M3×6 screws
Note: The checkmark means the part is needed for the correspond-
ing instrument.
407
Precautions
B
D
Pa1X Pro
Pa1X
√
√
√
√
√
× 2
× 4
× 1
× 2