Song Edit: Move; Preferences: Global Setup - Korg PA1X User Manual

186 Sequencer operating mode

Song Edit: Move

Mode
Use this parameter to select the Copy mode.
Merge Copied data are merged with the data at the tar-
get position.
Overwrite Copied data replace all data at the target position.
Warning: Deleted data cannot be recovered!
From Track... To Track
Use these parameters to select the source and target track to
copy.
All All tracks. The target track cannot be selected.
Track 1...16 Selected source and target tracks.
Start Measure... End Measure
These parameters are the starting and ending measure to copy.
For example, if From Measure=1 and To Measure=4, the first
four measures are copied.
To Measure
This parameter is the first of the target measures.
Repeat Times
Number of times the copy must be executed. Copies will be con-
secutive.
Song Edit: Move
Here you can shift a track forward or backward by just a few
ticks or whole measures.
After setting the various parameters, press Execute to complete
the operation.
Track
Use these parameters to select the track you want to move.
Track 1...16 Selected track.
Start / End Tick
These parameters set the starting and ending point of the range
to move.
To Tick
This parameter allows you to set the target starting point of the
moved track.

Preferences: Global Setup

In this page, you can select a MIDI Setup and the Harmony track
for the Sequencer mode.
Note: These settings are stored in the Sequencer Setup area of the
Global file. (Parameter of this kind are marked with the
abbreviation through the manual). After changing these settings,
select the Write Global-Sequencer Setup command from the page
menu to save them to the Global.
Midi Setup
MIDI channels for the Sequencer mode can be automatically
configured by selecting a MIDI Setup with this parameter. See
"MIDI" on page 280 for more information on using MIDI Set-
ups.
Note: To automatically select a MIDI Setup when entering the
Sequencer mode, select the Write Global-Sequencer Setup com-
mand from the page menu.
For detailed information on MIDI Setup settings, see "MIDI
Setup" on page 328.
Note: After selecting a MIDI Setup, you can go to the Global mode
and apply any change to each channel setting. To store these
changes to a MIDI Setup, while still in Global mode select the Write
Global-Midi Setup command from the page menu. All MIDI Set-
ups can be freely customized and overwritten.
Hint: To restore the original MIDI Setups, load the original Fac-
tory data again (downloadable from www.korgpa.com).
Harmony Track
The Voice Processor gets the chord notes from the track selected
with this parameter.
Hint: Go to the Voice Processor Preset section of the Global mode to
try different Voice Processor Presets while creating or editing a
Song.
Off No track sends notes to the Harmony module of
the Voice processor. Chords can still be received
from the MIDI IN.
Seq.1-Track 1...16
Chords are sent from one of Sequencer 1 tracks.
Seq
Seq
Seq