Korg PA1X User Manual page 149

Song name
Song assigned to the selected sequencer. Use the side tabs SEQ 1
and SEQ 2 to select a sequencer whose Song to show.
Markers side tabs
Standard Song Markers contained in a midifile can be read with
the Pa1X, to quickly jump to a given position in the Song. Addi-
tionally, you can set your own marker points on-the-fly.
Press one of these side tabs to access the Marker panel corre-
sponding to one of the two sequencers.
Note: Markers do not work when the Groove Quantize is activated.
Note: It is not advisable to use them with a Jukebox file assigned to
Sequencer 1, since pressing PLAY/STOP would delete the markers.
How to add a marker:
1. Go to the Song Play > Mark Seq.1 (Seq.2) page.
2. Start the Song by pressing the SEQ.1 (SEQ.2) PLAY/STOP
button.
3. When you reach the position you want to save as a marker,
press the Add button in the display.
• If you press Add within the first beats of the measure, the
beginning of the current measure is saved as a marker.
• If you press Add within the last beat of the measure, the
beginning of the followng measure is saved as a marker.
4. Do the same for any following marker.
5. Stop the Song by pressing the SEQ.1 (SEQ.2) PLAY/STOP
button.
How to jump to a saved marker:
1. Start the Song again.
2. When you want to jump to a saved marker, touch it in the
display. The Song will jump to the saved position at the
beginning of the next measure.
How to edit a marker:
1. Touch the marker to be edited in the display.
2. Press the Edit button in the display to set the marker to
edit. The Edit Marker window will appear.
3. While in Edit Marker window, you can edit the name and
position of the marker being edited.
Song Play operating mode
How to delete a marker:
1. Touch the marker to be deleted in the display.
2. Press the Delete button in the display to delete the selected
marker.
How to save the markers:
From the page menu, choose the "Save Song Marker Seq.1" or
"Save Song Marker Seq.2" (depending on the sequencer where
you created the markers). The markers will be saved into the
midifile.
Auto Scroll
Check this parameter if you want the current marker to be
always visible in the display during playback, by making the list
of markers scroll automatically.
Don't check this parameter, if you prefer to prevent the list from
scrolling. This is useful if you want a marker to remain in the
display, ready to be selected as soon as you want to jump to its
position, with no need to scroll the list to catch it out.
Options side tab
Press this side tab to access the Options panel, and adjust the
various video settings (see details below).
Display Controls
Use these parameters to define how lyrics are shown in the dis-
play.
Characters
Size of fonts. You can choose between a smaller and a bigger
font.
Link int and ext video
When checked, settings for the internal display are automatically
mirrored to the external video monitor.
Show chords
If this parameter is checked, chords are shown above lyrics in the
display – provided the midifile contains them.
TXT File – Text Follow
When linking a ".TXT" file to a Song, you scroll the text by using
the Text Down and Text Up assignable commands. Unlike the
reading of Lyrics events contained in a Standard MIDI File, there
is no automatic scrolling, that make the current verse start on
top of the internal and the external display at the same time.
Therefore, text shown in the internal display and in the external
video might begin with a different verse. This parameter lets you
145
Lyrics & Markers panel
Sng
Sng
Sng
Sng