Page Menu - Korg pa 500 User Manual

Page menu

Press the page menu icon to open the menu. Press a command to
select it. Press anywhere in the display to close the menu without
selecting a command.
Write Performance
Select this command to open the Write Performance dialog box,
and save most of the current control panel settings to a Perfor-
mance.
See "Write Performance dialog box" on page 102 for more infor-
mation.
Write Single Touch Setting
Select this command to open the Write Single Touch Setting
(STS) dialog box, and save Keyboard track settings to one of the
Single Touch Settings (STS) of the current Style.
See "Write Single Touch Setting dialog box" on page 102 for
more information.
Write Current Style Performance
Select this command to open the Write Current Style Perfor-
mance dialog box, and save Style track settings to the Style Per-
formance of the current Style.
See "Write Single Touch Setting dialog box" on page 102 for
more information.
Write Global-Style Setup
Select this command to open the Write Global-Style Setup dia-
log box, and save global settings that are unique to the Style Play
mode. These settings are programmed on the "Preferences: Style
Play Setup" page (see page 100).
See "Write Global-Style Play Setup dialog box" on page 103 for
more information.
Solo Track
Select the track to be soloed, and check this item. You will hear
only the selected track, and the 'Solo' warning will flash on the
page header.
Uncheck this item to exit the Solo function.
The Solo function works in a slightly different way, depending
on the selected track:
• Keyboard track: The selected Keyboard track is the only track
you can hear when playing on the keyboard. All other Keyboard
tracks are muted. The status of the Style tracks is unaffected.
Style Play operating mode
• Style track: The selected track is the only Style track you can
hear. All other Style tracks are muted. The status of the Keyboard
tracks is unaffected.
• Grouped Style tracks: The Solo function does not work on these
special tracks.
Keep the SHIFT button pressed and touch one of the
tracks to solo it. Do the same on a soloed track to deactivate the
Solo function.
Copy/Paste FX
You can copy a single, or all four effects, between Styles, Perfor-
mances, STSs and Songs. To do this, choose the "Copy FX" and
"Paste FX" commands from the page menu of the Style Play,
Song Play or Sequencer modes.
To copy a single effect:
1. Select the source Song, Performance, Style or STS, then
• go to the page of the single effect you want to copy (FX A,
FX B, FX C, or FX D), or
• go to the Effects > FX Select page, to copy all four effects.
This may be useful if you want to copy two or three of the
four effects into different Performances, Styles or STSs.
2. Choose the "Copy FX" command from the page menu.
3. Select the target Performance, Style or STS, then go to the
page of the single effect you want to paste (FX A, FX B, FX
C, or FX D).
4. Choose the "Paste FX" command from the page menu.
To copy all four effects:
1. Select the source Performance, Style or STS, then go to the
Effects > FX Select page, to copy all four effects.
2. Choose the "Copy FX" command from the page menu.
3. Select the target Performance, Style or STS, then go to the
page of the Effects > FX Select page.
4. Choose the "Paste FX" command from the page menu.
Easy Mode
Easy Mode allows you to use the Style Play and Song Play modes
with an easier-to-use user interface. It is recommended to begin-
ners, and to professionals alike that do not want to deal with the
extra parameters of the Advanced mode.
At any time, you can manually turn the Easy Mode on/off with
the Easy Mode command in the page menu of the Style Play and
Song Play modes.
See "The Style Play page in detail" on page 7 for more informa-
tion.
101
Page menu