Write Using A Page Menu Command; Write Using The [Rec/Write] Key - Korg Trinity series Basic Manual

9. Writing a program or combination

Write using a page menu command

In Program Play mode, press the page menu command Update Program, and follow the instruc-
tions in the dialog box to write the data. In Combination Play mode, press the page menu com-
mand Update Combination, and write the data by following the instructions in the dialog box.
This will write the data to the currently selected program or combination number.
In Program Edit mode, press the page menu command Write Program, and follow the instructions
in the dialog box to write the data. In Combination Edit mode, press the page menu command
Write Combination, and write the data by following the instructions in the dialog box. This
allows you to specify the program or combination number to which the data will be written.
The following example shows how to write the program in the Write Program dialog box.
Press the [PROG] key, then the [EDIT] key, and then the [P1] key.
1
You will enter Program Edit mode page 1.
In the LCD screen, press the first tab button (Prog
2
Basic).
The Prog Basic display will appear.
Press the Program Name text edit button, and
3
modify the program name. Press the OK button.
Press the page menu button.
4
The page menu commands will be displayed.
Press the Write Program page menu command.
5
A dialog box will appear.
Press the OK button.
6
The display will ask "Are you sure?," so press the OK button once again to execute the Write oper-
ation.
If you wish to modify the Write destination, specify the desired Bank and Program.
To modify the program name, press the Write Program text edit button.

Write using the [REC/WRITE] key

Regardless of whether you are in Play mode or Edit mode, this method writes the data into the
currently selected program or combination number. (This is the same as when the page menu
command Update Program or Update Combination is used to write the data.)
Here is the procedure for modifying and writing a program.
Follow steps
1
Press the [REC/WRITE] key located on the front panel.
2
A dialog box will appear.
Press the OK button.
3
The write operation will be executed.
24
Writing source program
(the currently selected program)
Writing destination bank
Writing destination program
For this example, the writing destination bank
and program are the same as the writing source
– of "Write using a page menu command" to modify the program name.
1 3
3
4
2