7525-xxx
Lower frame removal, right and left
The right and left lower frames are in the same FRU.
Left lower frame
Remove the media tray, and remove the screw (A) in front.
1.
Remove the waste toner bottle. See
2.
3.
Remove the imaging unit. See
Remove the low-voltage power supply. See
4.
page
4-48.
Place the printer on the right side.
5.
6.
Remove the tray 2 connector (B) by pinching the tabs together and lowering the connector into the printer.
Service Manual
4-50
"Waste toner bottle" on page
"Imaging unit (IU) removal" on page
"Low-voltage power supply (LVPS) assembly" on
B
4-72.
4-45.
Previous
Next
Go Back