Address-Based Mirroring Configuration - Nortel 5510 Configuration

26 Chapter 1 General System Monitoring Considerations
Port-based mirroring example
In the configuration example shown in
(page
in any of the following modes:
•
•
•
•
•
•
•
•
•
Address-based mirroring configuration
"Address-based mirroring example" (page 27)
address-based mirroring configuration in which port 20, the designated
monitor port for Switch S1, is monitoring traffic occurring between address
A and address B.
Copyright © 2005 - 2007, Nortel Networks
.
Note: Trunks cannot be monitored and trunk members cannot be
configured as monitor ports.
26), the designated monitor port (port 20) can be set to monitor traffic
Monitor all traffic received by port X.
Monitor all traffic transmitted by port X.
Monitor all traffic received and transmitted by port X.
Monitor all traffic received by port X or transmitted by port Y.
Monitor all traffic received by port X (destined to port Y) and then
transmitted by port Y.
Monitor all traffic received/transmitted by port X and transmitted/received
by port Y (conversations between port X and port Y).
Monitor all traffic received on many ports.
Monitor all traffic transmitted on many ports.
Monitor all traffic received or transmitted on many ports.
Nortel Ethernet Routing Switch 5500 Series
Configuration - System Monitoring
NN47200-505 03.01 Standard
5.1 27 August 2007
"Port-based mirroring example"
shows an example of an