Figure 51 Console Interface Main Menu; Table 10 Console Interface Main Menu Options - Nortel 2000 Using Manual

152 Chapter 3 Using the console interface

Figure 51 Console interface main menu

Use arrow keys to highlight option, press <Return> or <Enter> to select
option.
Table 10

Table 10 Console interface Main Menu options

Option
IP Configuration/
Setup...
SNMP Configuration...
System
Characteristics...
208700-B
Business Policy Switch 2000 Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Identify Unit Numbers
Renumber Stack Units...
Display Hardware Units...
Spanning Tree Configuration...
TELNET/SNMP/Web Access Configuration...
Software Download...
Configuration File...
Display System Log
Reset
Reset to Default Settings
Command Line Interface
Logout
describes the CI main menu options
Description
Displays the IP Configuration/Setup screen (see
on page 155). This screen allows you to set or modify IP configuration
parameters and to ping other network devices.
Displays the SNMP Configuration screen (see
page 160). This screen allows you to set or modify the SNMP read-only
community and read-write community strings, enable or disable the
authentication trap and the link Up/down trap, set the IP address of trap
receivers, and set the trap community strings.
Displays the System Characteristics screen (see
screen" on page 162). This screen allows you to view switch characteristics,
including number of resets, power status, hardware and software version, and
MAC address. This screen also contains three user-configurable fields:
sysContact, sysName, and sysLocation. When the switch is part of a stack
configuration, this screen also displays the base unit identification, the number of
units configured in the stack, and the local unit stack number.
"IP Configuration/Setup
"SNMP Configuration screen" on
"System Characteristics
screen"